It is an advanced, water-based composition of a high-grade acrylic binder with sound-damping particles. LizardSkin Sound Control is a spray-applied automotive sound damping coating that is great for reducing exterior noises and enhancing sound systems. Mask off any areas that you don’t want coated.
For aluminum, stainless, fiberglass and wood, the surface needs to be cleaned and scuffed prior to the application of LizardSkin. If existing primer or paint has been on the substrate for more than 5-7 days, the surface needs to be cleaned and scuffed to allow for good mechanical adhesion. LizardSkin can be applied without scuffing to a newly primed metal surface. All other types of substrates do not require a primer. For bare steel surfaces, a primer with at least 15% elongation is required.
#Lizardskin sound control insulation free#
LizardSkin coatings must be applied to a clean, dry surface that is free from rust and corrosion. NOTE: When using both products (stacking) ALWAYS apply Sound Control FIRST then apply Ceramic Insulation on top. By rounding 3.72 up to 4, you will need four gallons of Sound Control.Round up to the next gallon to account for any square footage calculation errors.Divide total Sound Control square footage by 22 to calculate gallons needed.Multiply length times width to get your total square footage.Measure length and width of all surfaces to be coated accounting for all curves and irregular shapes.